STEP 1

Print and assemble the pattern

Follow the instructions for your paper size below.

1. Open the 36” print file in Adobe Acrobat

• If you don’t already have Adobe Acrobat, download it here.

2. Open the layers panel

• Our files are set up with each size on a separate layer which allows printing one size at a time. This saves on ink and removes overlapping lines which cause confusion.

3. Uncheck all the sizes except the size you want to print

4. Open the print panel

5. Print

• Under the Page sizing & handling section, ensure ‘Actual size’ is selected

6. Measure the square

• If incorrect, adjust the print settings until the square measures correct.

1. Open the A0 print file in Adobe Acrobat

• If you don’t already have Adobe Acrobat, download it here.

2. Open the layers panel

• Our files are set up with each size on a separate layer which allows printing one size at a time. This saves on ink and removes overlapping lines which cause confusion.

3. Uncheck all the sizes except the size you want to print

4. Open the print panel

5. Print page 1 only

• Under the Pages to Print section, select ‘Pages’ and type “1”

• Under the Page sizing & handling section, ensure ‘Actual size’ is selected

6. Measure the square

• If incorrect, adjust the print settings until the square measures correct.

7. Print the remaining pages

• Under the Pages to Print section, select ‘Pages’ and type 2 - [total pages]

8. Lay the pages out as required

• Row 1 = A1, A2, A3…

• Row 2 = B1, B2, B3…

• Row 3 = C1, C2, C3…

9. Cut out the rectangles on each page

10. Arrange and tape the rectangles together

• For accurate alignment, match the diamonds along the edges

1. Open the 8.5” x 11” print file in Adobe Acrobat

• If you don’t already have Adobe Acrobat, download it here.

2. Open the layers panel

• Our files are set up with each size on a separate layer which allows printing one size at a time. This saves on ink and removes overlapping lines which cause confusion.

3. Uncheck all the sizes except the size you want to print

4. Open the print panel

5. Print page 1 only

• Under the Pages to Print section, select ‘Pages’ and type “1”

• Under the Page sizing & handling section, ensure ‘Actual size’ is selected

6. Measure the square

• If incorrect, adjust the print settings until the square measures correct.

7. Print the remaining pages

• Under the Pages to Print section, select ‘Pages’ and type 2 - [total pages]

8. Lay the pages out as required

• Row 1 = A1, A2, A3…

• Row 2 = B1, B2, B3…

• Row 3 = C1, C2, C3…

9. Cut out the rectangles on each page

10. Arrange and tape the rectangles together

• For accurate alignment, match the diamonds along the edges

1. Open the A4 print file in Adobe Acrobat

• If you don’t already have Adobe Acrobat, download it here.

2. Open the layers panel

• Our files are set up with each size on a separate layer which allows printing one size at a time. This saves on ink and removes overlapping lines which cause confusion.

3. Uncheck all the sizes except the size you want to print

4. Open the print panel

5. Print page 1 only

• Under the Pages to Print section, select ‘Pages’ and type 1

• Under the Page sizing & handling section, ensure ‘Actual size’ is selected

6. Measure the square

• If incorrect, adjust the print settings until the square measures correct.

7. Print the remaining pages

• Under the Pages to Print section, select ‘Pages’ and type 2 - [total pages]

8. Lay the pages out as required

• Row 1 = A1, A2, A3…

• Row 2 = B1, B2, B3…

• Row 3 = C1, C2, C3…

9. Cut out the rectangles on each page

10. Arrange and tape the rectangles together

• For accurate alignment, match the diamonds along the edges

STEP 2

Round up your tools

• Sewing machine

• Iron and ironing board

• Scissors

• Tape

• Pins

• Fabric pen or chalk

STEP 3

Gather your materials

STEP 4

Cut out the paper pieces for your size

STEP 5

Cut out the fabric pieces

• See step 4 for trim lengths

• Seam allowance and hem allowance are already included.

• Follow the cut instructions on the paper pieces Learn more >

STEP 6

Label your fabric pieces

• For clarity, we made the wrong side of our fabric darker.

• For a closer look, you can click or double-tap on the images to activate zoom.

STEP 7

Sew the back seam

• Use 1/2 inch seam allowance

• We chose a plain seam with a stretch stitch and finished it with an overcast stitch What should I choose?

STEP 8

Sew the side seams

• Use 1/2 inch seam allowance

• We chose a plain seam with a stretch stitch and finished it with an overcast stitch

STEP 9

Hem the edges

• We chose an overcast stitch

STEP 10

Hem the bottom

• There is 1 inch hem allowance

• We chose a plain seam with a stretch stitch and finished it with a double-needle topstitch

STEP 11

Close the elastic

• We chose a bartack stitch 1/4 inch from the edge

STEP 12

Attach the elastic

• We chose a stretch stitch

STEP 13

Fold the waistband

• Use 1/2 inch seam allowance

STEP 14

Sew the waistband

• We chose a double-needle topstitch

COMPLETE

You did it!

• Be a pro! Trim any excess thread and allowances, then, give it a good iron.

• Complete our 5-minute survey below and you can choose one of our patterns for free.