STEP 1
Print and assemble the pattern
Follow the instructions for your paper size below.
36” x 36” size paper
1. Open the 36” print file in Adobe Acrobat
If you don’t already have Adobe Acrobat, download it here.
2. Open the layers panel
Our files are set up with each size on a separate layer which allows printing one size at a time. This saves on ink and removes overlapping lines which cause confusion.
3. Uncheck all the sizes except the size you want to print
4. Open the print panel
5. Print
Under the Page sizing & handling section, ensure ‘Actual size’ is selected
6. Measure the square
If incorrect, adjust the print settings until the square measures correct.
A0 size paper
1. Open the A0 print file in Adobe Acrobat
If you don’t already have Adobe Acrobat, download it here.
2. Open the layers panel
Our files are set up with each size on a separate layer which allows printing one size at a time. This saves on ink and removes overlapping lines which cause confusion.
3. Uncheck all the sizes except the size you want to print
4. Open the print panel
5. Print page 1 only
Under the Pages to Print section, select ‘Pages’ and type “1”
Under the Page sizing & handling section, ensure ‘Actual size’ is selected
6. Measure the square
If incorrect, adjust the print settings until the square measures correct.
7. Print the remaining pages
Under the Pages to Print section, select ‘Pages’ and type 2 - [total pages]
8. Lay the pages out as required
Row 1 = A1, A2, A3…
Row 2 = B1, B2, B3…
Row 3 = C1, C2, C3…
9. Cut out the rectangles on each page
10. Arrange and tape the rectangles together
For accurate alignment, match the diamonds along the edges
8” x 11.5” size paper
1. Open the 8.5” x 11” print file in Adobe Acrobat
If you don’t already have Adobe Acrobat, download it here.
2. Open the layers panel
Our files are set up with each size on a separate layer which allows printing one size at a time. This saves on ink and removes overlapping lines which cause confusion.
3. Uncheck all the sizes except the size you want to print
4. Open the print panel
5. Print page 1 only
Under the Pages to Print section, select ‘Pages’ and type “1”
Under the Page sizing & handling section, ensure ‘Actual size’ is selected
6. Measure the square
If incorrect, adjust the print settings until the square measures correct.
7. Print the remaining pages
Under the Pages to Print section, select ‘Pages’ and type 2 - [total pages]
8. Lay the pages out as required
Row 1 = A1, A2, A3…
Row 2 = B1, B2, B3…
Row 3 = C1, C2, C3…
9. Cut out the rectangles on each page
10. Arrange and tape the rectangles together
For accurate alignment, match the diamonds along the edges
A4 size paper
1. Open the A4 print file in Adobe Acrobat
If you don’t already have Adobe Acrobat, download it here.
2. Open the layers panel
Our files are set up with each size on a separate layer which allows printing one size at a time. This saves on ink and removes overlapping lines which cause confusion.
3. Uncheck all the sizes except the size you want to print
4. Open the print panel
5. Print page 1 only
Under the Pages to Print section, select ‘Pages’ and type 1
Under the Page sizing & handling section, ensure ‘Actual size’ is selected
6. Measure the square
If incorrect, adjust the print settings until the square measures correct.
7. Print the remaining pages
Under the Pages to Print section, select ‘Pages’ and type 2 - [total pages]
8. Lay the pages out as required
Row 1 = A1, A2, A3…
Row 2 = B1, B2, B3…
Row 3 = C1, C2, C3…
9. Cut out the rectangles on each page
10. Arrange and tape the rectangles together
For accurate alignment, match the diamonds along the edges
STEP 2
Round up your tools
Sewing machine
Iron and ironing board
Scissors
Tape
Pins
Fabric pen or chalk
STEP 3
Gather your materials
STEP 4
Cut out the paper pieces for your size
STEP 5
Cut out the fabric pieces and trims
Seam allowance and hem allowance are already included.
Follow the cut instructions on the paper pieces Learn more >
See step 4 for trim lengths
STEP 6
Label your fabric pieces
For clarity, we made the wrong side of our fabric darker.
For a closer look, you can click or double-tap on the images to activate zoom.
STEP 8
Sew the front bodice
We chose a straight stitch
Trim the excess allowance
STEP 9
Gather the front bodice
We chose a basting stitch 1/4 inch from the edge
Match the center width of the darted front body
STEP 10
Sew the front bodice
We chose a straight stitch
Trim the excess allowance
STEP 11
Hem the shoulders
There is 1 inch hem allowance
We chose a double-fold overlocked turned-up hem and finished it with a straight stitch
Leave an opening for elastic insertion
STEP 12
Insert the elastics
STEP 13
Secure the elastics
We chose a straight stitch
STEP 14
Attach the sleeves
Use 1/2 inch seam allowance
We chose a straight stitch
STEP 15
Attach the front bodice
Use 1/2 inch seam allowance
We chose a straight stitch
STEP 16
Fold the front neckline
STEP 17
Fold the allowance
There is 1/2 inch fold allowance
STEP 18
Close the front bodice
We chose a straight stitch
STEP 19
Hem the back neck
There is 1/2 inch hem allowance
We chose a double-fold overlocked turned-up hem and finished it with a straight stitch
Leave an opening for elastic insertion
STEP 20
Hem the sleeves
We chose an overcast stitch
STEP 21
Attach the sleeves
Use 1/2 inch seam allowance
We chose a double-needle topstitch
Match the notches
STEP 22
Insert the elastic
STEP 23
Secure the elastics
We chose a straight stitch
STEP 24
Hem the bottom
We chose a double-fold overlocked turned-up hem and finished it with a straight stitch
Leave an opening for elastic insertion
STEP 25
Insert the elastic
STEP 26
Secure the elastics
We chose a straight stitch
STEP 27
Attach the elastics
Refer to the pattern for exact position
STEP 28
Sew the side seams
Use 1/2 inch seam allowance
We chose a plain seam with a straight stitch and finished it with an overcast stitch
STEP 29
Hem the sleeves
There is 1 inch hem allowance
We chose a double-fold overlocked turned-up hem and finished it with a straight stitch
Leave an opening for elastic insertion
STEP 30
Insert the elastics
COMPLETE
You did it!
Be a pro! Trim any excess thread and allowances, then, give it a good iron.
